tarm 25 OUTDOOR
IP65 waterproof laser system, suitable for outdoor use and fixed installations.
- IP65 waterproof housing
- 24'500 mW guaranteed power
- Complex graphics capable - 45 kpps@8° ILDA scanners – upgradable to 60kpps
- Extremely sharp intense beams - low divergence of <0.8 mrad
- Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
- Control screen (internal) for convenient mode selection
- Laser Artists' choice
- Lighting Designers' choice
Carte mère ShowNET par défaut :
- Diverses options de contrôle : Art-Net professionnel (deux modes), Fonctionnement autonome, Récepteur de flux ILDA, LAN (contrôle par ordinateur, DAC intégré)
- Créer du contenu personnalisé, le stocker à l'intérieur du laser et l'afficher dans différents modes
- Logiciel de contrôle Show Laser gratuit inclus
MODE AUTONOME:Le laser fonctionne de manière autonome et n'a pas besoin d'être contrôlé séparément. Il lit le contenu stocké sur la carte mère du laser.
Mode de contrôle ArtNET
MODE LAN:Le laser peut être contrôlé via réseau / LAN - il peut s'agir soit d'un contrôle logiciel direct, soit d'ArtNET ou d'un système similaire (selon la carte mère)
Streaming ILDA
SHOWNET INSIDE:<Le laser est équipé de la carte mère laser avancée ShowNET qui apporte une multitude de fonctionnalités au laser et en fait un dispositif d'éclairage intelligent.
SHOWEDITOR INCLUS:<La version complète du logiciel de contrôle laser Showeditor est incluse avec la carte mère ShowNET.
PANGOLIN FB4:<Commandez votre laser standard équipé du DAC Pangolin FB4. La FB4 remplace la carte mère ShowNET, les fonctionnalités sont donc limitées à celles de la FB4.
Avec la FB4 intégrée, le laser peut être directement contrôlé par le logiciel Pangolin.
Upgrade scanners CT-6210H:Upgrade des performances du scanner avec les puissants scanners CT-6210H avec l'électronique de gestion Turboscan Laseranimation.
The tarm 25 OUTDOOR are especially designed for outdoor laser installations. They come equipped with the top quality laser setup known from the standard tarm units, but have a waterproof enclosure that not only protects the components inside from water, but also shields off direct heat from solar exposure. A specially designed roof in front of the output window prevents it from getting impacted by direct rain.
To cope with varying temperatures, the tarm OUTDOOR units are equipped with an active watercooling system, that is built into the housing. An active heating system helps to keep the laser systems operational even at low temperatures. Thus the tarm 25 OUTDOOR lasers can be used at environmental temperatures between -10°C and +45°C. A CT Scanner upgrade with LAS Turboscan drivers is available for the tarm 25 OUTDOOR to achieve top end quality graphics results.
The tarm 25 OUTDOOR is made in Germany and is a compact show laser system that is ideally suited for top professional laser show applications of any kind. It is built with the latest RTI semiconductor laser modules that are specially designed in a way to keep spot size as well as divergence equal on both x- and y-axis. This is significantly advantageous over solutions with a very good divergence on one axis, but a bad divergence on the other. The laser modules inside the tarm 25 OUTDOOR are different - the spot size and shape is equal for all colors and on both axis!
The beam specifications of the new tarm 25 OUTDOOR are given with only ca. 5.0 mm diameter and <0.8 mrad divergence - which applies to both axis. The extremely small beam diameter allows for the use of very small mirrors, which results in reduced inertia and thus very good scanning performance.
- 24.5 W total RGB power in a small housing of only 800/370/260 mm
- super small spot of ca. 5.0 mm for reduced inertia and thus fast scanning
- All wavelengths matched in divergence and beam size
- extremely low divergence of <0.8 mrad - on both axis!
- Different, brighter wavelengths for increased visibility
- brilliant colors and great color fading
- Laser modules do not come out of internal alignment
- Maintenance free laser modules
- High quality product, Made in Germany
- Great scanning performance suitable for projections as well as for beams
The tarm 25 OUTDOOR impresses with a guaranteed RGB output power of 24'500 mW. Great visibility is achieved with the new RTI Semiconductor Laser modules (RSL) with special wavelengths for increased visibility: 7'500 mW / 637 nm for a very bright red combined with 12'000 mW / 525 nm green and a strong blue laser module with 10'000 mW / 455 nm. The 525nm green provides a warmer green tone than the 520nm diodes and has increased visibility.
These new RSL modules with their extremely low divergence and homogenous beam shape make the tarm 25 OUTDOOR a top professional laser system. The extremely small beam diameter of only ca. 5.0 mm allows for the use of small scanner mirrors which leads to reduced inertia and higher scan speeds. This is especially important, as the tarm 25 OUTDOOR can be used for any kind of laser show application: Super sharp beams and vivid colors for installation projects and multimedia, especially for crisp graphics.
The RTI Semiconductor Laser modules are maintenance free and do not come out of internal alignment.
The standard scanners can be run at a maximum of 45 kpps@8° ILDA and a maximum scan angle of 50°. CT-6210 scanners with LAS Turboscan drivers are available as option and provide even higher scan speeds with up to 60kpps at 8° ILDA .
Demanding graphics projections or projections over long distances are possible without any problems, due to the extremely good divergence.
The tarm 25 OUTDOOR is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.
If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an ILDA streaming signal - so the external ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the tarm 25 OUTDOOR via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.
> Plus d'informations
Télécharger la fiche technique
Marques Distribuées: