The RTI NANO RGB 50 OPSL has a guaranteed output power of 47'000mW full-color RGB and an incredible white balance. The benefits include:

  • 47'000 mW guaranteed output power after optics!
  • despite the high power it is possible to reach a maximum scan speed of >40 kpps@8° ILDA. Alternatively, the scanner upgrade CT-6215HP with Big Boy Driver is often integrated, which significantly increases the scan speed to a maximum of 60 kpps@8° ILDA.
  • high-precision diode arrays (blue, red) provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter!
  • an extremely high output power with a balanced power distribution: 13'000 mW / 638 nm red, 20'000 mW / 53030 nm green, 12'500 mW / 450 nm blue, and 8'000 mW / 462 nm blue. The special modules ensure brilliant colors, a homogeneous white and great color mixture. The 638 nm light red sources ensure a very good visibility of the red color spectrum. The two blue diode laser modules (12'500 mW / 450 nm & 8'000 mW / 462 nm) ensure more color nuances and higher visibility. The high-precision diode arrays emit with very small beam diameters and at the same time have an excellent divergence of less than 1.0 mrad. The beam precision of the single-mode diodes was significantly increased by a new method. The diode laser modules are manufactured by Ray Technologies in Germany. The green Coherent Taipan OPSL module stands out due to beam precision and 20'000 mW power.

    The RTI NANO RGB 50 OPSL is equipped with high-speed scanners, which ensure a high scan speed of >40 kpps@8° ILDA and a maximum scan angle of 50° (at 25 kpps). These devices are therefore suitable for a variety of different applications.
    The scanner upgrade CT-6215HP with Big Boy Driver is also very often integrated for very demanding applications, which significantly increases the scan speed to a maximum of 60 kpps@8° ILDA and a maximum scan speed of 60° (at 30 kpps).

    By default, the RTI NANO RGB 50 OPSL is controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser directly via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to operate the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone.
    Optionally the system can also be operated via LAN, DMX, SD card or in auto mode. W-DMX and a remote control pad are available on request. On the back of the device, there is an 'ILDA-IN' interface as well as an 'ILDA-Through' to loop through the control signal. The emergency stop signal can also be looped through for several RTI NANO laser systems, which means that only one emergency stop is sufficient for all RTI NANO devices connected to one another.
     
    Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

    The powerful RTI NANO RGB 50 OPSL is suitable for indoor and outdoor show laser applications at concerts, festivals and other major events. Demanding graphics projections or projections over long distances are possible without any problems.

    The RTI NANO RGB 50 OPSL is a quality product manufactured in Germany.

    Fabricante:
    Ray Technologies
    Potencia Garantizada Tras Óptica:
    47'000 mW
    Potencia Rojo:
    13'000 mW / 638 nm
    Potencia Verde:
    20'000 mW / 530 nm
    Potencia Azul:
    12'500 mW / 450 nm | 8'000 mW / 462 nm
    Clase de Láser:
    4
    Especificaciones del Haz (ángulo completo):
    aprox. 6.0 mm / <1.0 mrad
    Escáner:
    >40 kpps@8° ILDA; optional: CT-6215HP Big Boy Driver, 60 kpps@8° ILDA, max. 60° (@30 kpps).
    Ángulo de Escaneo:
    50° max. (@25 kpps)
    Fuente de Láser:
    Diodo, OPSL
    Modos de Funcionamiento:
    ILDA; optional DMX, Auto, LAN, SD-card, W-DMX
    Accesorios:
    Browser interface (integrated), Manual, Llave, Buccaneer cable; optional: detachable remote control pad incl. patch cable
    Fuente de Alimentación:
    85-250 V AC 50/60 Hz
    Consumo Eléctrico:
    1'200 W
    Tamaño:
    773 x 385 x 205 mm
    Peso:
    42 kg