• .

  • .

  • .

  • .

Copyright 2018 - The Laserworld Group

The RTI NANO G40 OPSL has a guaranteed output power of 36'000mW green OPSL. The benefits include:

KEY FEATURES

  • Single green OPSL system
  • Very low divergence, thus very good visible even from longer distance
  • New digital amps for the scanners - for increased scan speed and scanning accuracy
  • 36'000 mW guaranteed output power after optics
  • despite the high power it is possible to reach a maximum scan speed of 45kpps@8° ILDA. High speed scanner upgrade with CT-6215HP is also available.
  • a low divergence upgrade is available too: with the EMS-9000 scanners, the beam size grows to 10mm, but divergence reduces for perfect long distance projections.
  • high-precision green Coherent Taipan OPSL modules provide an excellent beam divergence of less than 1.0 mrad, a low beam diameter (with the LD-upgrade divergence: <0.6mrad) and high beam precision
  • an extremely high output power: 4 x 10'000 mW / 530 nm green
  • brilliant green color
  • newly developed electronics with calibration capability via a browser interface
  • Emergency stop signal can be looped through several RTI NANO systems, which means that one emergency stop is sufficient for all devices
  • quality product, made in Germany
  • Robust and dustproof housing, which also makes it possible to use it outdoors without problems
INCLUDING BROWSER INTERFACE

Easily connect to the RTI NANO laser with PC, MAC, tablet or mobile phone over LAN and adjust color balance, scanner position and scanning size, safety features and more. Laser configuration made easy - even if the system is mounted and not physically accessible any more.
OPTIONS

  • NANO LD - Low Divergence 
  • Scanner upgrade: CT-6215HP
  • RTI GOBO Wheel 
  • Pangolin FB4 




The RTI NANO G 40 OPSL is equipped with green OPSL modules.The special modules ensure brilliant green, emit with a very small beam diameter, and at the same time have an excellent divergence of less than 1.0 mrad (or even <0.6mrad with the special low divergence optics). 

The RTI NANO G 40 OPSL is equipped with high-speed scanners that make the unit perfect for high professional and demanding applications.

By default, the RTI NANO G 40 OPSL is controlled via ILDA and is equipped with advanced electronics that provides laser calibration via browser interface. The browser interface works with PC, MAC, Linux, tablet, mobile phone, etc., so the on-site calibration of this laser system is easy and does not require any physical access to the laser after set up any more. It connects via LAN (WIFI is also possible with a suitable access point) and contains calibration options or color balance, scanning position, safety features etc.
Optionally the system can also be supplied with an embedded FB4 (LAN, DMX, SD card operating modes). An external remote control pad is available on request. There is an 'ILDA-IN' interface as well as an 'ILDA-Through' on the back of the device to daisy-chain the control signal. The emergency stop / interlock signal can also be daisy chained for several RTI NANO laser systems, which means that only one emergency stop is sufficient for all RTI NANO devices connected to one another.

Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI NANO G 40 OPSL is suitable for indoor and outdoor show laser applications at concerts, festivals and other major events. Demanding graphics projections or projections over long distances are possible without any problems.

The RTI NANO G 40 OPSL is a quality product manufactured in Germany.

Fabricante:
Ray Technologies
Potencia Garantizada Tras Óptica:
36'000 mW
Potencia Verde:
40'000 mW / 530 nm
Clase de Láser:
4
Especificaciones del Haz (ángulo completo):
aprox. 6 mm / <1.0 mrad | optional: aprox. 10mm / <0.6 mrad (LD optics)
Escáner:
EMS-8000 6.5mm (digital): 45kpps@8° ILDA, max. 60° (@30kpps); optional EMS-9000 10mm with LD optics: 34kpps@6° ILDA; optional CT-6215HP 6mm: 50kpps@8° ILDA, max. 60° (@30kpps).
Ángulo de Escaneo:
60° max. (@30 kpps)
Fuente de Láser:
Coherent Taipan OPSL
Modos de Funcionamiento:
ILDA; optional DMX, Auto, LAN, SD-card
Accesorios:
Browser interface (integrated), Manual, Cable de alimentación; optional: detachable remote control pad
Fuente de Alimentación:
85-250 V AC 50/60 Hz
Consumo Eléctrico:
900 W
Tamaño:
431/385/205 mm
Peso:
29 kg



Distributed Brand Laserworld Distributed Brand tarm distributed brand Ray Technologies
Distributed Brand Laserworld Showeditor Distributed Brand Garden Star Distributed Brand Pangolin Distributed Brand coherent Distributed Brand Spider Laser Game

 

Laserworld Ibérica en España Laserworld Ibérica em Portugal Laserworld en Mexico Laserworld India Laserworld 日本 Laserworld 배달 Laserworld w Polsce Laserworld Türkiye