tarm 12G

The powerful single green tarm 12G is suitable for indoor and outdoor show laser applications at concerts, festivals and other large scale events. It is also perfect for sky laser and landmark laser applications.
Demanding graphics projections or projections over long distances are no problem for this impressive unit due to the extremely good divergence. Green is pretty much the most visible laser color, so a single high power green unit is the most cost effective way to have a highly visible beam.

Including waterproof flightcase

11'000 mW guaranteed power
for long distance beams and projections at <0.8 mrad
High precision RSL Semiconductor modules for homogenous beam profile and equal divergence of <0.8 mrad on the x and the y axis
Complex graphics capable - 45kpps @ 8° ILDA scanners – upgradable to 60kpps
Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
Integrated network switch for linking control signal
Control screen for convenient mode selection
Rugged tour grade compact housing
incl. waterproof flightcase

ShowNET mainboard as standard:

Various control options: ILDA, Professional DMX (two modes), Professional Art-Net (two modes), Stand-Alone Operation, Master-Slave, ILDA Streaming Receiver, LAN (Computer control, integrated DAC)
Create custom content, store it inside the laser and play it back in different modes
Free laser show control software included

STAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.

DMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.

ArtNET Control mode

MASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.

LAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)

ILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.

ILDA Streaming

SHOWNET INSIDE:
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.

SHOWEDITOR INCLUDED:
The full version of the laser show control software Showeditor is included in delivery.

AVAILABLE MODIFICATIONS:

PANGOLIN FB4:
Order your laser standard equipped with the Pangolin FB4 DAC. The FB4 substitutes the ShowNET mainboard, so features are limited to the ones of the FB4.
With the FB4 integrated, the laser can be directly controlled via Pangolin software.

CT-6210H Laseranimation Turboscan driver

SCANNER UPGRADE CT-6210H:
Upgrade the scanner performance with the powerful CT-6210H Scanners with Laseranimation Turboscan drivers.

GOBO WHEEL:
Add awesome glass effects and gratings to the laser show with this additional effects wheel.

The tarm 12G show laser system is a top professional single color laser with advanced RSL Semiconductor modules as sources and a guaranteed output power of 11'000 mW.

The tarm 12G units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX / ArtNET, or run in stand-alone mode.
The tarm 12G comes with integrated ShowNET network interface and free laser show software.

11'000 mW guaranteed output power
a very fast maximum scan speed of 45kpps @ 8° ILDA for graphics projection
high-precision RSL modules provide an excellent beam divergence of <0.8 mrad for a low beam diameter of ca. 5.0 mm
great linear fading
integrated network switch for linking the control signal
the tarm 12G impresses with a very bright 525 nm green with a guaranteed output power of 11'000 mW
MANUFACTURED IN GERMANY

The system has great beam specifications with a beam diameter of ca. 5.0 mm and a beam divergence of <0.8 mrad (full angle). It is equipped with green (2x 6'500 mW / 525 nm) RSL Semiconductor modules.

The tarm 12G devices have very fast scanners, running at 45kpps @ 8° ILDA and scanning a maximum scan angle of 50°, upgrades to CT-scanners with 60kpps @ 8° ILDA and a deflection angle of up to 60° are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

The housing of the tarm 12G is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 12G is suitable for demanding show laser applications and graphics projections at festivals, on big stages, for touring and rental purposes. It is also suitable as landmark laser or sky laser.

+ Integrated ShowNET incl. free laser show software

The tarm 12G features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 12G for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played back from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.