The tarm seven show laser projector is a pure diode solution with analog color modulation and a guaranteed output power of 7'3030kpps), upgrades to CT-scanners with 60kpps@8° ILDA and a deflection angle of up to 68° (@ 35kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

Several units can be addressed at the same time, even the positioning of the devices on a virtual stage is possible. This makes it easy to identify the respective unit to be calibrated.

The projector has good specifications with a beam diameter of ca. 3.5 mm and a beam divergence of only 0.9 mrad (full angle). It is equipped with a red (2'300 mW / 638 nm), a green (1'900 mW / 520 nm), and a blue (4'000 mW / 450 nm) diode laser source.

Advantages of the tarm four devices:

  •     pure diode solution
  •     main board control via browser interface
  •     no physically access to the laser projector needed
  •     fast scanners
  •     wide scan angle
  •     low beam divergence
Potencia Garantizada Tras Óptica:
7'300 mW
Potencia Rojo:
2'300 mW / 638 nm
Potencia Verde:
1'900 mW / 520 nm
Potencia Azul:
4'000 mW / 450 nm
Clase de Láser:
Especificaciones del Haz (ángulo completo):
aprox. 3.5 mm / 0.9 mrad
45kpps@8°ILDA; optional as upgrade: CT-6210H incl. Rti RayScan driver: 60kpps@8° ILDA, max. 68° (@35kpps)
Ángulo de Escaneo:
50° (@30 kpps)
Fuente de Láser:
Modos de Funcionamiento:
browser interface for calibration, Cable de alimentación, Manual, Llave, interlock connector
Fuente de Alimentación:
85 V - 250 V / AC
Consumo Eléctrico:
320 W
320/260/140 mm
12 kg